Driveway Coatings

Below is a list of our products in this category. To view Material Safety Data Sheets or Product Data Sheets, please use on the corresponding links.

#4500 100% Acrylic Driveway & Floor Ctg. White

4500 Specially formulated coating specifically designed for use on a variety concrete substrates, such as walkways, patios and even driveways. Its special formulation provides excellent durability, superior fade resistance and a smooth low sheen finish that resists cracking, peeling and chipping. It applies easily, may be applied to previously painted surfaces, properly primed metal surfaces and even surface areas that have been previously coated with a concrete stain. It has excellent weatherability, and may be applied to both fresh and fully cured concrete surfaces. Available in White, Tint Base, Deep Base, Accent Base, Patio Green, Courtyard Gray, Black, Sahara Tan, Sequoia Brown, Coffee, Clay, Sussex Gray, Concrete, Sandpoint, and Court Red. FOR INTERIOR & EXTERIOR USES!
  • Excellent Durability
  • Applies Easily
  • Cleans Up Easily With Water
  • Resists Chipping
  • Resists Cracking
  • Resists Peeling
 lpm

#500 Bond-Crete Silicone/Acrylic Concrete Waterproof/Sealer

500 Durable pigmented masonry waterproofing coating, that when properly applied, is designed to penetrate into unpainted and/or unsealed cementitious surfaces. Its special formulation of solvents, acrylic resin, silicone and color pigments not only add long lasting beauty to the surface, but also helps to seal the surface, so it fully protects the surface from powdering, resists staining and resists moisture penetration.  It may be applied to surface areas previously coated with a similar concrete stain type product, but is not recommended for application over any other existing paint coatings. Available in White Canvas, Deep Base, Accent Base, and 11 stock colors. FOR EXTERIOR USE ONLY!
  • Dries Fast
  • Low Sheen
  • Excellent Weather Resistance
  • Superior Color Retention
  • Superior Wear Resistance
 LiteraturePDSMSDS

#51 Shield's All Paver-Coat Clear Gloss Sealer/Finish

51 High gloss clear sealer designed for application to brick pavers, concrete floors, and other cementitious floor type substrates. Its special solvent thinned 100% acrylic resin formulation provides an extremely durable finish that penetrates and seals the surface, while protecting the surface from powdering, oil and grease stains, and it resists moisture penetration.  Its high gloss finish enhances the color of substrate, resists hot tire pick-up, seals and waterproofs the surface. FOR EXTERIOR USE ONLY!
  • Resists Moisture Penetration
  • Fast Drying
  • Excellent Wear Resistance
  • Easy to Apply
  • Resists Yellowing
  • Superior UV Light Resistant
  • Dries Fast
 LiteraturePDSMSDS

#51-HS Shield's All Paver-Coat High Solids Clear Gloss Sealer/Finish

51-HS High gloss clear sealer designed for application to brick pavers, concrete floors, and other cementitious floor type substrates. Its special solvent thinned 100% acrylic resin formulation provides an extremely durable finish that penetrates and seals the surface, while protecting the surface from powdering, oil and grease stains, and it resists moisture penetration.  Its high gloss finish enhances the color of substrate, resists hot tire pick-up, seals and waterproofs the surface. FOR EXTERIOR USE ONLY!
  • Fast Dry
  • Penetrates & Seals
  • Excellent Weather Resistance
  • Excellent Durability
  • Resists Staining
  • Clear High Gloss Finish
  • Superior UV Resistant
  • Easy to Apply
 LiteraturePDSMSDS

#53 Shield's All Clear Concrete Floor & Driveway Sealer/Finish

53 Special modified acrylic clear coating, specifically formulated for application as a finish coating for most bare and/or painted concrete substrates. Its special formulation provides a hard and durable gloss finish that also seals the surface, providing excellent wear and abrasion resistance, moisture resistance and easier detergent cleaning.  FOR INTERIOR & EXTERIOR USES!
  • Product Versatility
  • Durable Gloss Finish
  • Excellent Sealing Qualities
  • Wear & Abrasion Resistant
  • Applies Easily
  • Cleans Up with Water
  • Excellent Weather Resistance
  • Seals Slightly Chalked Surfaces
 LiteraturePDSMSDS

#57 Shield's All Aqua Coat

Eco-Rich: Yes 57

Richard's Shields All Aqua Coat Acrylic Clear Gloss Sealer/Finish is a specially formulated, high gloss clear sealer designed for application to brick pavers, concrete floors, and other cementitious floor type substrates. Its special 100% acrylic resin formulation provides an extremely durable finish that penetrates and seals the surface, while protecting the surface from powdering, oil and grease stains, and it resists moisture penetration. It dries fast, provides excellent wear resistance, adhesion, product versatility, is easy to apply, resists yellowing, and provides superior UV light resistance. Its high gloss finish enhances the color of substrate, resists hot tire pick-up, seals and waterproofs the surface. FOR INTERIOR OR EXTERIOR USE!
  • BRICK PAVERS
  • COBBLESTONE
  • CONCRETE
  • STAMPED CONCRETE
  • POOL DECKS
  • STONE
  • LOADING DOCKS
  • PATIO DECKS
  • DRIVEWAYS
  • GARAGE FLOORS
  • WAREHOUSE FLOORS
  • DECORATIVE BRICK & CONCRETE
 msds
RSS Feeds