Below is a list of our products in this category. To view the Material Safety Data Sheet or the Product Data Sheet, please click on the corresponding link.

#4500 Series, 100% Acrylic Driveway & Floor Coating

4500

MPI LogoA specially formulated floor coating specifically designed for use on a variety of concrete substrates, such as floors, walkways, patios and driveways. It provides excellent durability, fade resistance and a smooth low sheen finish that resists cracking, peeling and chipping. It applies easily, and may be applied to previously painted surfaces, properly primed metal surfaces, and even surface areas that have been previously coated with a concrete stain. It has excellent weathering properties, is mildew resistant and may be applied to both interior and exterior surfaces. Available in 4500-White; 4501-Tint Base; 4502-Deep Base; & 4503-A-Accent Base. Also available in 12 stock colors: Patio Green; Courtyard Gray; Black; Sahara Tan; Sequoia Brown; Coffee; Clay; Sussex Gray; Concrete; Sandpoint and Court Red. Meets MPI Standard #127 of the Master Painters Institute approved products list. Great for both interior & exterior use.
  • 100% Acrylic Formula
  • Excellent Coverage
  • Excellent Durability
  • Excellent Weather Resistance
  • Resists Chipping
  • Resists Cracking
  • Resists Peeling
  • MPI Approved
#500 Series, Bond-Crete Solvent/Acrylic Concrete Waterproof/Sealer

500

A durable pigmented masonry waterproofing stain designed to penetrate into unpainted and/or unsealed cementitious surfaces. Its special formulation of solvents, acrylic resin, silicone and color pigments add long lasting beauty. It helps to seal the surface fully protecting it from powdering, staining and moisture penetration. It dries fast, has a low sheen to minimize slipping, provides excellent weather resistance, wear resistance and offers superior color retention. It may be applied to surface areas coated with a similar concrete stain type product, but is not recommended for application over any other existing paint coatings. Available in 500 White Canvas; 500-DB Deep Base; 500-AC Accent Base; and 10 stock colors. For exterior use.
  • Waterproofs
  • Solvent Acrylic Formula
  • Low Sheen
  • Penetrates & Seals
  • Fast Drying
  • Weather Resistant
  • Wear Resistant
  • Moisture Resistant
#51 PaverSeal Clear Gloss Sealer/Finish

51

A specially formulated clear sealer/finish designed for application to brick pavers, concrete floors, and other cementitious type floor substrates. Formulated from solvent thinned 100% acrylic resins, it provides an extremely durable finish that penetrates and seals the surface. It provides excellent resistance to surface powdering, oil and grease stains, and provides superior resistance to moisture. Easy to apply, it provides excellent coverage and adhesion, excellent wear and weather resistance, and it resists yellowing. It resists hot tire pick-up, has superior UV resistance, excellent product versatility, and its high-gloss finish enhances the color of the surface, as well as seal and waterproof the surface. For exterior use only.

 

  • Solvent Acrylic Formula
  • Penetrates & Seals
  • Moisture Resistant
  • Stain Resistant
  • Excellent Coverage
  • Excellent Durability
  • Excellent Wear Resistance
  • Easy To Apply
#51-HS PaverSeal High Solids Clear Gloss Sealer/Finish

51-HS

MPI LogoA specially formulated clear sealer/finish designed for application to new brick pavers, concrete floors, and other new cementitious type floor substrates. Formulated to provide a higher solids film build finish, it provides an extremely durable finish that also penetrates and seals the surface. It provides excellent resistance to surface powdering, oil and grease stains, as well as providing superior resistance to moisture. Easy to apply, it provides excellent coverage and adhesion, excellent wear/weather resistance, and resists yellowing. It provides superior UV resistance, and has excellent product versatility. Its high gloss finish enhances the color of the surface, seals and waterproofs the surface, and helps resist hot tire pick-up. For exterior use only.
  • High Solids Formula
  • Solvent Acrylic Formula
  • Fast Dry
  • Penetrates & Seals
  • Excellent Durability
  • Excellent Weather Resistance
  • MPI Approved
  • Moisture & Stain Resistant
#510, BondCrete Silicone/Acrylic Concrete Waterproof Sealer - Clear

510

A durable clear masonry waterproofing coating designed to penetrate into unpainted and/or unsealed cementitious surfaces. Its special formulation of solvents, acrylic resin, and silicone add long lasting beauty to the surface, helping to seal it while protecting it from powdering, staining and moisture penetration. It dries fast, and has a low sheen to minimize slipping. It provides excellent weather resistance, wear resistance, and offers superior color retention. It may be applied to surface areas coated with a similar concrete stain type product, but is not recommended for application over any other existing paint coatings. For exterior use only.
  • Fast Dry
  • Superior Weather Resistance
  • Penetrates & Seals
  • Superior Wear Resistance
  • Resists Staining
  • Prevents Moisture Penetration
#53 Shield's All Clear Concrete Floor & Driveway Sealer/Finish

53

A special modified acrylic clear coating, specifically formulated for application as a finish coating for most bare and/or painted concrete substrates. Specially formulated using new technologies in acrylic polymers, it provides a hard and durable gloss finish that also seals the surface.  It also provides excellent wear and abrasion resistance, moisture resistance and easier detergent cleaning. Easy to apply, it offers excellent product versatility allowing for application on a variety of interior and exterior substrates. It seals slightly chalked surfaces, has excellent gloss retention, provides excellent weather resistance, is fast drying and cleans up with water. For interior & exterior use.
  • Modified Acrylic Formula
  • Durable Gloss Finish
  • Excellent Sealing Qualities
  • Wear & Abrasion Resistant
  • Moisture Resistant
  • Excellent Product Versatility
  • Easy To Apply
  • Excellent Weathering
#57 Shield's All Aqua Coat 100% Acrylic Waterproofing Paver Sealer/Finish

57

EcoRich logoA specially formulated, clear sealer/finish specifically designed for application to brick pavers, concrete floors, and other cementitious floor substrates. Its special 100% acrylic resin formulation provides a durable finish that penetrates and seals the surface, while protecting the surface from powdering, oil and grease stains, and it resists moisture penetration. Easy to apply, it provides superior wear resistance, excellent adhesion, product versatility, and provides superior UV light resistance. Its rich gloss finish enhances the color of brick pavers, resists hot tire pick-up, seals and waterproofs the surface, and is VOC Compliant. For interior & exterior use.
  • 100% Acrylic Formula
  • Excellent Sealing Qualities
  • Durable Gloss Finish
  • Wear Resistant
  • Moisture Resistant
  • Product Versatility
  • Easy To Apply
  • Excellent Adhesion